MegaFan Technologies was established in Manchester, UK, in 2006 and has since become one of the UK’s longest-established and leading specialists in HVLS fans and large-building airflow solutions.
Â
Over the last two decades, we have supplied, installed and supported thousands of products across the UK and Ireland, working with organisations in warehousing, logistics, manufacturing, aerospace, automotive, agriculture, leisure, commercial buildings, transport infrastructure and other specialist environments.
Â
During that time, MegaFan has grown from a specialist HVLS fan provider into a broader airflow solutions company. Today, we provide clients with a complete service covering technical design, application engineering, installation, commissioning, Safety & Maintenance and ongoing site support.
Â
Our approach is simple:Â Understand the building. Understand the requirement. Provide the right airflow solution.
When MegaFan was established in 2006, almost all of our projects were focused on winter destratification. The primary requirement was to recover heat trapped at high level in warehouses, factories and other large buildings and return it to the occupied space below.
Â
Since then, the market has changed significantly.
Â
The combination of rising energy costs and increasingly warm summer conditions has changed the way customers view large-building airflow. Today, our systems are expected to deliver value throughout the year — supporting destratification and heating efficiency during colder months while also providing effective air movement and occupant cooling during warmer conditions.
At the same time, the financial case for energy efficiency has strengthened considerably. Official UK energy data shows that industrial electricity prices have risen sharply over the long term, while industrial gas prices also remain substantially above historic levels. DESNZ continues to publish official industrial energy-price data, and ONS analysis confirms that non-domestic electricity and gas prices remain materially higher than they were before the recent energy crisis.Â
Â
That means the same percentage reduction in heating or cooling energy can now represent a far greater financial saving than it did when MegaFan began trading.
Â
As a result, the return on investment for effective airflow and destratification solutions can be significantly shorter today, depending on the building, operating hours, heating system, energy tariff and existing level of stratification.
Â
This shift has been an important part of MegaFan’s development from a predominantly winter-focused HVLS specialist into a provider of year-round Total AirFlow Solutions.
Over the last two decades, MegaFan has supplied, installed and supported thousands of products across the UK and Ireland.
Â
That installed base gives us practical experience across a broad range of industries, building types and applications.
Â
It also means our knowledge is based on long-term, real-world use rather than theoretical performance alone.
Â
We have seen how equipment performs in different environments, how buildings change over time and what is required to keep systems operating safely and effectively throughout their working life.
Â
This experience continues to shape the way we approach every new project.
Our principal products are manufactured in Europe and are fully CE marked, giving our customers confidence in quality, consistency, traceability and long-term support.
Â
We also care about our environmental impact.
Â
Wherever possible, we avoid unnecessarily shipping large, bulky products from the other side of the world when high-quality equipment can be manufactured much closer to the markets we serve.
Â
By sourcing our principal products from European manufacturers and holding substantial stocks in our UK warehouse, we can shorten supply chains, reduce transport distances and respond more quickly to customer requirements.
Â
All control systems are manufactured in house at our head office based in Manchester, programmed and fully tested before dispatch.
Â
This approach provides several practical advantages:
Â
- Reduced reliance on long-distance international freightÂ
- Lower transport-related environmental impactÂ
- Faster delivery for many projectsÂ
- Better availability of replacement componentsÂ
- Reduced exposure to extended overseas lead timesÂ
- Greater continuity of technical and after-sales supportÂ
Â
For our customers, this means access to proven European-manufactured equipment without the delays and logistical uncertainty often associated with products shipped halfway around the world.
Â
It also reflects an important part of our philosophy: selecting products based on quality, reliability, supportability and whole-life value.
MegaFan is not simply an equipment supplier.
Â
Our clients have access to an experienced technical team covering the complete project lifecycle, including:
Â
- Site surveysÂ
- Application engineeringÂ
- System designÂ
- Product selectionÂ
- Mounting and structural considerationsÂ
- Electrical requirementsÂ
- Controls and automationÂ
- Installation planningÂ
- CommissioningÂ
- Fault findingÂ
- Safety & MaintenanceÂ
- Ongoing technical supportÂ
Â
This allows projects to be treated as complete engineered solutions rather than individual product purchases.
Technical issues can be dealt with directly by people who understand both the equipment and the practical realities of installing and supporting it within operational buildings.
MegaFan provides experienced mechanical and electrical installation teams capable of completing projects in industrial, commercial and specialist environments.
Â
Our engineers are accustomed to working around the practical constraints typically found in large buildings, including:
Â
- Structural steelworkÂ
- Roof trusses and purlinsÂ
- Overhead cranesÂ
- LightingÂ
- Sprinkler systemsÂ
- Cable containmentÂ
- RackingÂ
- MachineryÂ
- Production equipmentÂ
- Restricted access areas
Where standard arrangements are not suitable, alternative or bespoke mounting solutions can be developed to suit the application.
By retaining control of the installation process, we can ensure the system is installed in accordance with the original design intent before commissioning and handover.
MegaFan can support the full project lifecycle:
Â
Initial Enquiry → Site Survey → Design → Product Selection → Installation → Commissioning → Handover → Safety & Maintenance
Â
This gives clients a single specialist partner from the earliest stage of a project through to long-term support.
Where required, we can also work alongside consultants, architects, main contractors, M&E contractors, facilities management organisations and client engineering teams.
Â
This allows MegaFan to integrate into both new-build developments and existing operational facilities.
MegaFan Technologies has been recognised both for the performance of our products and for the standards we apply to the way we operate.
Energy Savings Product of the Year
Â
MegaFan was voted Energy Savings Product of the Year by the Energy Managers Association, recognising the contribution our technology can make to reducing energy consumption within large buildings.
Â
MegaFan is SafeContractor Approved, demonstrating that our health and safety procedures and working practices meet recognised industry standards.
Â
We are also Avetta Approved, providing additional assurance for clients that require contractors and suppliers to meet defined standards for health, safety, compliance and supply-chain management.
Â
MegaFan is also EcoVadis Approved, reflecting our commitment to responsible business practices, sustainability and corporate responsibility.
Together, these awards and approvals give clients additional confidence that MegaFan combines technical capability with recognised standards of safety, compliance and responsible business practice.
MegaFan has always believed that good products should continue to evolve.
Â
When we started the business, the HVLS industry was largely based around a simple one fan, one controller approach. MegaFan was the first HVLS fan company in the world to introduce a network control solution, allowing multiple fans to be managed from a single point of control.
That principle of continual development has remained part of the business ever since.
Â
The technology itself has also changed significantly.
Â
Our original HVLS fans used traditional three-phase AC motors and gearboxes. These were comparatively heavy, required more mechanical maintenance and needed a separate Variable Frequency Drive (VFD) to control each fan.
Â
Today, our latest systems use high-efficiency Permanent Magnet EC motors, with the electronic drive integrated directly into the fan.
This provides a number of important advantages:
Â
- Lower electrical running costsÂ
- Higher motor efficiencyÂ
- Simpler installationÂ
- Reduced cabling and external control equipmentÂ
- Lower maintenance requirementsÂ
- Reduced mechanical complexityÂ
- Lighter overall fan weightÂ
- Cleaner, more compact installationsÂ
Â
The same development has taken place in our control and automation systems.
Over the years, we have continued to improve the way our systems are controlled, making them more intuitive, more flexible and easier to integrate into modern buildings. Our current technical capability already includes controls and automation as part of the complete engineered solution.Â
Â
Our control solutions have evolved to include:
Â
- Centralised control of multiple fansÂ
- Touchscreen user interfacesÂ
- BMS integrationÂ
- Automatic temperature-based operationÂ
- Temperature and humidity monitoringÂ
- Intuitive Summer and Winter operating modesÂ
- Automatic fan-speed adjustmentÂ
- Control strategies designed to maximise energy savings and occupant comfortÂ
- Integration with wider building control systems where requiredÂ
Our Summer and Winter modes allow the system to respond automatically to changing building conditions. During colder periods, the controls can optimise destratification and reduce unnecessary heating demand, while warmer conditions can trigger cooling strategies based on temperature and humidity.
Â
The objective is to make increasingly sophisticated control technology simple for the end user.
Â
This same philosophy applies across everything we do. We continue to review our products, motors, controls, software, installation methods and support services, using feedback from real installations and long-term customers to guide future development.
Â
We never stop improving, innovating and listening to our customers.
Â
That commitment to continual development has helped MegaFan progress from an early HVLS fan specialist into the broader Total AirFlow Solutions business we are today.
MegaFan is a UK company with an established international partner network, allowing us to support customers with facilities outside the UK and Ireland.
Â
Our partner network includes operations in:
Â
This network allows multinational clients to maintain continuity in product selection and technical approach while benefiting from local regional expertise and support.
Where projects arise outside the UK and Ireland, we can work with the appropriate regional partner to provide the local support required.
MegaFan is built around long-term customer relationships.
Â
Many of our clients return to us for additional installations, new facilities, upgrades, maintenance and ongoing technical support.
Our objective is not simply to supply equipment. It is to provide the experience, technical capability, installation expertise and long-term support required to deliver dependable airflow solutions throughout the working life of the system.
Â
From the initial site survey to ongoing Safety & Maintenance, our customers have access to the people, products and engineering knowledge required to support their airflow requirements over the long term.